Friday, November 25, 2005

bandwidth point?

http://www.cisco.com/univercd/cc/td/doc/product/core/7206/port_adp/config/3875in.htm
Cisco一直声称在7206上加各种板卡需要计算bandwidth point,在使用NPE 400的情况下,每个PCI bus最多只支持600 points,如果oversubscribe的话,PA-2FE, PA-POS-2OC3, I/O-2FE等2 port的板卡就会有一个port无法正常使用,因此大家在配置72的时候也一直会遵从这个规则。但是最近发现公司的两台7206VXR在oversubscribe的情况下仍然可以正常使用I/O-2FE的两个port,难道Cisco晃点大家?


下面是具体信息,每台72上left bus都配了一块I/O-2FE (400 bandwidth points required),一块SA-VAM(300 bandwidth points required),total points left bus: 700。

PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.Current configuration on bus mb0_mb1 has a total of 700 bandwidth points.The set of PA-2FE, PA-POS-2OC3, and I/O-2FE qualify for "halfbandwidth points" consideration, when full bandwidth point countingresults in oversubscription, under the condition that only one of thetwo ports is used. With this adjustment, current configuration on busmb0_mb1 has a total of 500 bandwidth points.This configuration is within the PCI bus capacity and is supportedunder the above condition.
Slot 0: Dual FastEthernet (RJ-45) I/O Card Port adapter, 2 ports Port adapter is analyzed Port adapter insertion time 51w0d ago EEPROM contents at hardware discovery: Hardware Revision : 1.2 Top Assy. Part Number : 800-07114-04 Part Number : 73-5003-04 Board Revision : B0 PCB Serial Number : 24661850 RMA History : 00 Fab Version : 02 Fab Part Number : 28-3455-02 Product (FRU) Number : C7200-I/O-2FE/E Board Revision : IDPROM FIELD FORMAT ERROR, index 0x40 EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 02 15 41 01 02 C0 46 03 20 00 1B CA 04 0x10: 82 49 13 8B 04 42 42 30 C1 8B 32 34 36 36 31 38 0x20: 35 30 00 00 00 04 00 02 02 85 1C 0D 7F 02 CB 8F 0x30: 43 37 32 30 30 2D 49 2F 4F 2D 32 46 45 2F 45 42 0x40: 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 1: VAM Encryption/Compression engine. Port adapter Port adapter is analyzed Port adapter insertion time 51w0d ago EEPROM contents at hardware discovery: Hardware Revision : 1.0 PCB Serial Number : 30040935 Part Number : 73-5953-05 Board Revision : A0 RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Deviation Number : 0-0 Product (FRU) Number : SA-VAM Top Assy. Part Number : 800-10496-05 CLEI Code : CN9ISV0AAA EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 02 8A 41 01 00 C1 8B 33 30 30 34 30 39 0x10: 33 35 00 00 00 82 49 17 41 05 42 41 30 03 00 81 0x20: 00 00 00 00 04 00 80 00 00 00 00 CB 94 53 41 2D 0x30: 56 41 4D 20 20 20 20 20 20 20 20 20 20 20 20 20 0x40: 20 C0 46 03 20 00 29 00 05 C6 8A 43 4E 39 49 53 0x50: 56 30 41 41 41 FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Interface Status ProtocolFa0/0 up up Fa0/0.510 up up Fa0/0.511 up up Fa0/0.512 up up Fa0/1 up up Fa0/1.530 up up Fa0/1.531 up up Fa0/1.532 up up

No comments: